ANGELA's FotoPage

By: ANGELA Joubert

[Recommend this Fotopage] | [Share this Fotopage]
[<<  <  8  9  10  11  12  13  14  [15]  16  17  18  19  20  21  22  >  >>]    [Archive]
Wednesday, 14-Aug-2013 20:13 Email | Share | | Bookmark
A Hooray For HighVelocity Air Conditioners

How It Works.

Also known as "mini-duct" systems, high-velocity air-conditioning usually utilizes an outdoor compressor to cool the air, combined with a high-pressure blower (normally mounted in the attic).

Instead of large metal ductwork, this technology, developed by SpacePak, utilizes flexible tubing only 2 inches in diameter. The insulated tubes can be threaded behind walls or inside closets without damaging sheetrock or plaster. This makes the system much quieter than air-conditioning with standard metal ductwork.

A mini-duct system also dehumidifies the air more effectively. The high-pressure blower compresses the air and allows it to be in contact with the cooling coils longer, which reduces the temperature level and gets rid of more humidity.

It's All Central.

In fact, "high-velocity" and mini-duct" systems are just different names for the same type of super-efficient and comfortable central air-conditioning systems. These systems are very quiet, distribute the cool air evenly throughout your home, and dehumidify extremely efficiently.

The words "high velocity" and "pressure" might make you think these systems are noisy. In fact, you can hardly hear them running, and there is no air flow sound at the tiny outlets.

In two-story houses, the mini-ducts are run down from the attic through the corners of the closets or inside walls to the first floor. In a single-story house, the whole system is found in the attic with outlets in the ceiling below.

SpacePak's mini-duct systems make use of common, high-efficiency, outdoor air-conditioning compressor units. With this mini-duct system, cool air blows out from small two-inch openings in the ceiling or high up on the walls. You can hardly notice the outlets when they are painted the same color as the room. For a decorative look, natural wood outlets are available.Air Conditioning Repairs Lancaster PA\nAir Conditioning Repair Lancaster PA


Wednesday, 14-Aug-2013 19:10 Email | Share | | Bookmark
Inexpensive Comfort Found In Portable Air Conditioners

Some garages are utilized for recreation rooms so children or grown ups can have a bit of a hideaway spot in which to play pool, watch tv or play darts. Since garages are not typically set up with central air conditioning, so an air conditioning unit will need to be added to the garage or portable air conditioning units can be used instead.

Portable air conditioning units range in cost depending on the model and the size. They will normally start out at around three hundred dollars, and can range up to around 7 hundred dollars. You will need to measure the area of the space where you want portable air conditioner. The larger the location, the larger the size of the air conditioner you will want to use. Having portable air conditioning units provides you the versatility to move it from place to place and cool areas of the house where no cooling exists.

Portable air conditioning units are also great in houses where there is no central air conditioning. Lots of areas in the nation have homes that were built without central air conditioning because of the climate and lack of need for it. However, with changing climate conditions, some older houses do not have central air conditioning, while that area of the nation has actually gotten warmer.

While it might not have been essential to have air conditioning several decades back, it is quite uncomfortable not to have it now. In such areas, portable air conditioners are the ideal option and much less expensive than installing a complete a/c system. You can buy portable air conditioning units at the majority of home improvement stores such as Home Depot or Lowes. You can also go shopping online using the Internet to carry out a search.Tucson Air Conditioner Repairs\nhttp://www.ritewayac.com/cooling-solutions


Wednesday, 14-Aug-2013 17:13 Email | Share | | Bookmark
Ways to Select A Fireplace or Heating Stove For Your Home

THE RIGHT KIND OF FIREPLACE FOR YOUR HOUSE:

If you are considering the addition of a fireplace to your home, then the first thing you need to choose is which kind of fireplace would best fit your home.

Natural gas inserts and freestanding stoves help to not only keep your home warm, but also burn cleaner and help maintain indoor air quality. Regardless of today's high natural gas costs, these sell much better than wood burning fireplaces, and create less outdoor pollution problems.

Gas fireplaces, gas inserts, and pellet stoves are popular among today's consumers in supplying efficient zone heating. When you think about these kinds of fireplaces as an additional heat source, you will see energy expenses drop, due to the fact you do not need to keep the thermostat set as high as you would without it. A natural gas fireplace can effectively heat up to 1,000 square feet of living space in your house.

FACTORS TO CONSIDER FOR FIREPLACE CHOICES:

Prior to deciding the sort of fireplace that would be best for you and the model that you would like to have, keep in mind a few of the following points:

Masonry wood burning fireplaces can lose up to 85 % of their heat through the chimney. They are also considered to be high polluters of the outside air, and create problems with air quality and cleanliness in the home. Gas fireplace inserts can be set up in practically any existing masonry fireplace. Masonry fireplaces also come in a large variety of styles and designs.

Other aspects that should be thought about are the climate you reside in, the location of your home, and the age of your home. Also think about the construction of your home, as well as the amount of heat that is required to keep it warm.

If you are thinking about purchasing a fireplace for zone heating, think about gas fireplaces, gas inserts and pellet appliances. It is recommended to buy gas fireplace systems with an A.F.U.E. (Annual Fuel Utilization Efficiency) rating.

Direct vent gas fireplaces are required to be kept close to an outside wall. They require air from the outdoors to feed the flame, while relatively cool gases are exhausted through a wall mounted or roof vent.

Vent free fireplaces do not require outside venting. This kind of fireplace is not recommended in newer houses, due to the fact that they can produce condensation within the home over time. These are also open fireplaces that do not have doors on them.

Class B vents are needed for standard gas fireplaces. The Class B roof vent flue helps carry away hot combustible gases, and the majority of have operable doors.

Pellet devices are free standing stoves or fireplace inserts that burn wood based pellets made mostly from compressed sawdust. These are mainly used for zone heating, and were made to make use of waste wood produced by manufacturing companies. They are a highly efficient way to burn these waste wood materials that can be purchased in 40 lb. bags. These pellet devices can be used to burn alternative fuels consisting of corn and grains. One advantage of pellet fuel is the ability to lock in fuel costs at the start of the fall and winter seasons.Go To The Web Site\nHeating Repairs Phoenix Arizona


Wednesday, 14-Aug-2013 12:04 Email | Share | | Bookmark
Simple Ways To Perform Plumbing Maintenance

A little understanding about the systems can be extremely beneficial when it concerns repairing certain complications and can reduce the amount of money spent on these services. Sometimes, complications with these systems could happen very rapidly and they require an immediate response and resolution. In numerous cases, there is no time to call the service company.

In these kinds of emergency scenarios, a fundamental knowledge about repairing the systems is not only preferable, but also necessary to prevent a much bigger, more expensive problem. Family members can equip themselves with crucial info about basic complications that can occur and ways to accomplish the repairs. Most of the damage typically happens to the water, sewage or pumping systems.

Problems could emerge as a result of numerous reasons. These could consist of extremely low temperatures outside that could cause the pipes to freeze or faulty pipes that might develop cracks. The first thing that the family members should learn is ways to spot damages in the systems. This can be done by a simple assessment.

If the site of the damage is not determined correctly, all of the actions taken to fix it could be useless. If there are complaints about an unusually troubling smell in your house, it might be an indicator that there is a problem in the sewage system. The first measure to take would be to look at the toilet to see if the pipes are wet which might show a crack that is causing a leakage.

Pipe damage is the kind of problem that in the majority of cases, cannot be repaired without special equipment. The very best decision in this situation will be to shut off the central water tap to prevent further leakage from the sewage system. Another problem that households may experience is the troubling sounds that could come from the toilet when the toilet tank is emptied.

This sound happens when the half emptied toilet tank begins to refill. This often indicates that the fill valve is wearing out and has to be replaced. This valve can be purchased at the hardware store and can be quickly replaced by the property owner.

Blocked drains are yet another commonly occurring problem in the water and sewage systems. One must always keep in mind that the most susceptible places in the system are the corners of the pipes. Such a complication could easily be resolved by opening the pipes and manually discharging the obstructions. These are the most standard plumbing maintenance tips that everybody should know in order to quickly fix complications that are not too major without hiring the plumber and squandering precious money and time.Tucson Plumber\nRead More About It


Tuesday, 13-Aug-2013 14:22 Email | Share | | Bookmark
The best ways to Choose A Fireplace or Heating Stove For Your Ho

THE RIGHT KIND OF FIREPLACE FOR YOUR HOME:

If you are thinking about the addition of a fireplace to your house, then the first thing you have to decide is which kind of fireplace would best suit your house.

Natural gas inserts and freestanding stoves help to not only keep your house warm, but also burn cleaner and help maintain indoor air quality. Despite today's high natural gas prices, these sell better than wood burning fireplaces, and produce less outdoor pollution problems.

Gas fireplaces, gas inserts, and pellet stoves are popular among today's consumers in supplying efficient zone heating. When you consider these sorts of fireplaces as a supplemental heat source, you will see utility costs drop, due to the fact you do not have to keep the thermostat set as high as you would without it. A natural gas fireplace can efficiently heat up to 1,000 square feet of living space in your house.

FACTORS TO CONSIDER FOR FIREPLACE OPTIONS:

Prior to deciding the type of fireplace that would be best for you and the model that you would like to own, bear in mind a few of the following points:

Masonry wood burning fireplaces can lose up to 85 % of their heat through the chimney. They are also considered to be high polluters of the outdoor air, and create problems with air quality and cleanliness in the house. Gas fireplace inserts can be set up in almost any existing masonry fireplace. Masonry fireplaces also are available in a broad variety of design and styles.

Other factors that ought to be considered are the climate you live in, the location of your house, and the age of your house. Also think about the construction of your house, along with the amount of heat that is required to keep it warm.

If you are thinking about purchasing a fireplace for zone heating, think about gas fireplaces, gas inserts and pellet appliances. It is suggested to purchase gas fireplace systems with an A.F.U.E. (Annual Fuel Utilization Efficiency) rating.

Direct vent gas fireplaces are required to be kept close to an outside wall. They need air from the outside to feed the flame, while reasonably cool gases are exhausted through a wall mounted or roofing vent.

Vent free fireplaces do not need outdoor ventilation. This kind of fireplace is not suggested in newer houses, since they can produce condensation within the house over time. These are also open fireplaces that do not have doors on them.

Class B vents are required for conventional gas fireplaces. The Class B roof vent flue helps carry away hot flammable gases, and a lot of have operable doors.

Pellet devices are free standing stoves or fireplace inserts that burn wood based pellets made mainly from compressed sawdust. These are primarily used for zone heating, and were designed to use waste wood produced by manufacturing companies. They are a highly efficient way to burn these waste wood products that can be bought in 40 lb. bags. These pellet devices can be used to burn alternative fuels consisting of corn and grains. One perk of pellet fuel is the ability to lock in fuel costs at the beginning of the fall and winter seasons.Green Bay WI Heating Repair\nK Kelly


[<<  <  8  9  10  11  12  13  14  [15]  16  17  18  19  20  21  22  >  >>]    [Archive]

© Pidgin Technologies Ltd. 2016

ns4008464.ip-198-27-69.net